Manual

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 211 2015-08-03
Response
+CGQMIN: <cid>,<precedence>,<delay>,>reliability>,<peak>,<mean>
[<CR><LF>+CGQMIN:
<cid>,<precedence>,<delay>,<reliability>,<peak>,<mean>
[…]]
OK
Read Command
AT+CGQMIN?
Parameters
See Write Command
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Write Command
AT+CGQMIN=<
cid>[,<precedenc
e>[,<delay>[,<rel
iability>[,<peak>
[,<mean>]]]]]
Parameters
<cid>
1..3 A numeric parameter which specifies a particular
PDP context definition (see +CGDCONT command)
<precedence>
0 QOS precedence class subscribed value
1..3 QOS precedence class
<delay>
0 QOS delay class subscribed value
1..4 QOS delay class subscribed
<reliability>
0 QOS reliability class subscribed value
1..5 QOS reliability class.
<peak>
0 QOS peak throughput class subscribed value
1..9 QOS peak throughput class
<mean>
0 QOS mean throughput class subscribed value
1..18 QOS mean throughput class
31 QOS mean throughput class best effort
Parameter Saving
Mode
AUTO_SAVE
Max Response
Time
-
Reference Note
7.2.4 AT+CGQREQ Quality of Service Profile (Requested)
AT+CGQREQ Quality of Service Profile (Requested)