Manual

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 199 2015-08-03
+CMNRP: (0-1)
OK
AT+CMNRP=?
Parameters
See Write Command
Response
+CMNRP: <mode>
OK
Read Command
AT+CMNRP?
Parameters
See Write Command
Response
OK
ERROR
Write Command
AT+CMNRP=<
mode>
Parameters
<mode> 0 Disable dual serial port
1 Enable dual serial port
Parameter Saving
Mode
AT&W_SAV E
Max Response
Time
-
Reference Note
 Please refer to SIM800 Series_Serial Port_Application Note.doc.
 Part of the projects supported by this AT command, please refer to
chapter 21 for details.
6.2.69 AT+CEGPRS Switch on or off EDGE
AT+CEGPRS Switch on or off EDGE
Response
+CEGPRS: (0,1) , (2,4,8,9,10,12)
OK
Test Command
AT+CEGPRS=?
Parameters
See Write Command
Response
+CEGPRS: <switch>[,<class>]
OK
Read Command
AT+CEGPRS?
Parameters
See Write Command
Write Command Response