Manual

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 192 2015-08-03
Parameters
<format> 0 MSB
1 LSB
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference Note
Part of the projects supported by this AT command, please refer to chapter
21 for details.
6.2.60 AT+CPCMSYNC Set PCM Sync Parameter
AT+CPCMSYNC Set PCM Sync Parameter
Response
+CPCMSYNC: (0-1),(1-8)
OK
Test Command
AT+CPCMSYN
C=?
Parameters
See Write Command
Response
+CPCMSYNC: <sync>, <length>
OK
Read Command
AT+CPCMSYN
C?
Parameters
See Write Command
Response
OK
ERROR
Write Command
AT+CPCMSYN
C=<sync>,<lengt
h>
Parameters
<sync> 0 PCM short sync
1 PCM long sync
<length> 1-8 PCM sync length(1-8)
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference Note
 The <length> is only supported 1 when PCM sync is short sync.
 Part of the projects supported by this AT command, please refer to
chapter 21 for details.