Manual

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 16 2015-08-03
2.2.22 ATS8 Add parameter saving mode
2.2.26 ATX Add parameter saving mode
3.2.4 AT+CBST Add parameter saving mode
3.2.16 AT+CLCC Add parameter saving mode
3.2.12 AT+CSCS Add parameter saving mode
3.2.51 AT+CRSL Add parameter saving mode
3.2.52 AT+CLVL Add parameter saving mode
6.2.33 AT+CIURC Add parameter saving mode
6.2.53 AT_CSDT Add parameter saving mode
6.2.54 AT+CSMINS Add parameter saving mode
3.2.32 AT+CREG Modify parameter save mode
6.2.44 AT+SVR Modify parameter save mode
7.2.10 AT+CGREG Modify parameter save mode
3.2.24 AT+CPBS Delete parameter save mode
3.2.25 AT+CPBW Delete parameter save mode
2.2.28 AT&C Modify the format
3.2.5 AT+CCFC Change error word: <reads> to <reason>
3.2.33 AT+CRLP Add Save mode and reference
3.2.36 AT+FCLASS Modify information about +FCLASS
3.2.47 AT+CCLK Add note
4.2.5 AT+CMGS Add Note
6.2.18 AT+CHF Modify parameter range and note
6.2.19 AT+CHFA
Add patameters of write command and test
command,modify note
6.2.20 AT+CSCLK Add new parameter and note
6.2.24 AT+CMTE Increase the temperature range
6.2.28 AT+CCPD Set default value
6.2.33 AT+CIURC Set default value
6.2.41 AT+SPWM Modify parameter direction and note
6.2.51 AT+CNETLIGHT Add test and read command
6.2.53 AT+CSDT Modify note
6.2.55 AT+CSGS Modify parameter default value
6.2.56 AT+CMICBIAS
Add default value and modify parameter
description
6.2.57 AT+DTAM Add AT command
6.2.58 AT+SJDR Add AT command
6.2.59 AT+CPCMCFG Add AT command
V1.02 2013-10-23
6.2.60 AT+CPCMSYNC Add AT command