Manual

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 151 2015-08-03
6.2.9 AT+CDSCB Reset Cell Broadcast
AT+CDSCB Reset Cell Broadcast
Execution
Command
AT+CDSCB
Response
OK
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference Note
Please also refer to AT+CSCB.
6.2.10 AT+CMOD Configure Alternating Mode Calls
AT+CMOD Configure Alternating Mode Calls
Response
+CMOD: (0)
OK
Test Command
AT+CMOD=?
Parameters
See Write Command
Response
+CMOD: <mode>
OK
Read Command
AT+CMOD?
Parameters
See Write Command
Response
OK
ERROR
Write Command
AT+CMOD=[<m
ode>]
Parameters
<mode> 0 Only single mode is supported
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference Note
6.2.11 AT+CFGRI Indicate RI When Using URC
AT+CFGRI Indicate RI When Using URC
Test Command Response