Manual

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 140 2015-08-03
ERROR
command>
Parameters
<command> STK DTMF command
0 Trigger modem to send STK DTMF
4 Trigger modem to send STK DTMF but icon cannot be
displayed
32 ME currently unable to process command
Parameter Saving
Mode
NO_SAVE
Max Response Time -
Reference Note
Above are the possible terminal response value needed to be responded by
application.It’s modem’s responsibility to response for other terminal
response value.
5.2.8 +STKPCI STK Proactive Command Indication
+STKPCI STK Proactive Command Indication
+STKPCI: <pci_type>[,<proactive_command>,…]
Parameter
<pci_type>
-0 The SAT command is handled by TE.
-1 The SAT command is handled by ME.
-2 No other command (end of session)
<proactive command>
-DISPLAY TEXT,<Command Qualifier>,<text string>
-GET INKEY, <Command Qualifier>,<text string>
-GET INPUT, <Command Qualifier>,<text string>,<Min length>,<Max
length>
-PLAY TONE,<alpha id>,<tone>,<Time unit>,<Time interval>
-SET UP MENU,<the number of item>,<alpha id>
-SELECT ITEM, <the number of item>,<alpha id>
-ITEM,<index>,<id>,<item string>
-SEND SHORT MESSAGE,<alpha id>,<addr>,<sms tpdu>
-SEND SS,<alpha id>,<ss string>
-SEND USSD,<alpha id>,<ussd string>
-SETUP CALL,<alpha id>,<addr>
-SET UP IDLE MODE TEXT,<text string>
-SEND DTMF,<alpha id>,<dtmf string>.
If <alpha id> = 0, the alpha id is null
If <addr> = 0, the addr is null
Parameter Saving
Mode
NO_SAVE