Manual

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 108 2015-08-03
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference
3GPP TS 27.007
[13]
Note
3GPP TS 27.007 specifies 30 seconds, so SIMCom deviates from the
specification.
3.2.52 AT+CBC Battery Charge
AT+CBC Battery Charge
Response
+CBC: (list of supported <bcs>s),(list of supported <bcl>s),(<voltage>)
OK
Test Command
AT+CBC=?
Parameters
See Execution Command
Response
+CBC: <bcs>, <bcl>,<voltage>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Execution
Command
AT+CBC
Parameters
<bcs> Charge status
0 ME is not charging
1 ME is charging
2 Charging has finished
<bcl> Battery connection level
1...100 battery has 1-100 percent of capacity remaining
vent
<voltage> Battery voltage(mV)
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference
3GPP TS 27.007
[13]
Note
This command depends on hardware and only be used when battery is
charging.
3.2.53 AT+CUSD Unstructured Supplementary Service Data
AT+CUSD Unstructured Supplementary Service Data