Manual

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 107 2015-08-03
per unit; dot is used as a decimal separator(e.g. "2.66")
<passwd> String type (string should be included in quotation marks);
SIM PIN2
Parameter Saving
Mode
NO_SAVE
Max Response
Time
5s
Reference
3GPP TS 27.007
[13]
Note
3.2.51 AT+CCWE Call Meter Maximum Event
AT+CCWE Call Meter Maximum Event
Response
+CCWE: (list of supported <mode>s)
OK
If error is related to ME functionality:
+CME ERROR: <err>
Test Command
AT+CCWE=?
Parameters
See Write Command
Response
+CCWE: <mode>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Read Command
AT+CCWE?
Parameters
See Write Command
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<mode> 0 Disable call meter warning event
1 Enable call meter warning event
Write Command
AT+CCWE=<m
ode>
Unsolicited result codes supported:
+CCWV Shortly before the ACM (Accumulated Call Meter)
maximum value is reached, an unsolicited result code +CCWV will be
sent, if enabled by this command. The warning is issued approximately
when 5 seconds call time remains. It is also issued when starting a call if
less than 5 s call time remains.