User Manual

! ! " !

Espressif Systems

ESP8266

AT Command Examples

Response: > //From now on, data received from UART will be

transparent transmitted to server.

•

Stop sending data:

If a packet of data that contains only “+++”, then the transparent transmission process will be

stopped. Please wait at least 1 second before sending next AT command.

Please be noted that if you input “+++” directly by typing, the “+++”, may not be recognised as three

consecutive “+” because of the Prolonged time when typing.

Note:

The aim of ending “+++” is to exit transparent transmission and turn back to accept normal AT

command, while UDP transmission still exists. However, we can also use command “AT+CIPSEND” to

turn back into transparent transmission.

•

Disable UART - WiFi passthrough mode (transparent transmission)

AT+CIPMODE=0

Response : OK

•

Delete UDP transmission:

AT+CIPCLOSE

Response :CLOSED OK

Espressif Systems Conﬁdential  / Friday, Oct 23, 201513 16