Instructions

" " ! "
Espressif Systems
ESP8266
AT Instruction Set
13.
AT+CIPMUX – Enable multiple connections
AT+ CIPMUX – Enable or disable multiple connections
Example
AT+CIPMUX=1
Command
AT+CIPMUX?
Response
+CIPMUX:<mode>
OK
Parameters
<mode>
0 : single connection
1 : multiple connection
Command
AT+CIPMUX=<mode>
Response
OK
If already connected, returns
Link is builded
Parameters
The same as above.
Notes
1. "AT+CIPMUX=1" can only be set when transparent transmission disabled
( "AT+CIPMODE=0")
2. This mode can only be changed after all connections are disconnected.
3. If TCP server is running, it must be deleted before single connection mode
can be activated.
Espressif Systems  / Friday, July 15, 201665 73