Instructions

" " ! "
Espressif Systems
ESP8266
AT Instruction Set
1.
AT+CWMODE – WiFi mode! 23 ....................................................................
2.
AT+CWMODE_CUR – current WiFi mode ! 24 ..............................................
3.
AT+CWMODE_DEF – default WiFi mode! 25 ................................................
4.
AT+CWJAP – Connect to AP! 26 ..................................................................
5.
AT+CWJAP_CUR – Connect to AP, for current! 27 .......................................
6.
AT+CWJAP_DEF – Connect to AP, save as default! 28 .................................
7.
AT+CWLAPOPT – Set configuration for command AT+CWLAP ! 29 .............
8.
AT+CWLAP – List available APs ! 30 .............................................................
9.
AT+CWQAP – Disconnect from AP! 31 .........................................................
10.
AT+CWSAP – Configuration of softAP mode! 31 ..........................................
11.
AT+CWSAP_CUR – Current config of softAP mode! 32 ................................
12.
AT+CWSAP_DEF – Default config of softAP mode! 33 ..................................
13.
AT+CWLIF – IP of stations ! 34 .....................................................................
14.
AT+CWDHCP – Enable/Disable DHCP ! 35 ..................................................
15.
AT+CWDHCP_CUR – Enable/Disable DHCP! 36 ..........................................
16.
AT+CWDHCP_DEF – Enable/Disable DHCP and save to flash ! 37 ...............
17.
AT+CWDHCPS_CUR – Set the IP address allocated by ESP8266 soft-AP DHCP, does
not save to flash! 38 .....................................................................................
18.
AT+CWDHCPS_DEF – Set the IP address allocated by ESP8266 soft-AP DHCP, save
to flash! 39 ....................................................................................................
19.
AT+CWAUTOCONN – Auto connect to AP or not! 39 ...................................
20.
AT+CIPSTAMAC – Set MAC address of station ! 40 ......................................
21.
AT+CIPSTAMAC_CUR – Set MAC address of station ! 41 ............................
22.
AT+CIPSTAMAC_DEF – Set MAC address of station, save as default ! 41 ....
23.
AT+CIPAPMAC – Set MAC address of softAP ! 42 ........................................
24.
AT+CIPAPMAC_CUR – Set MAC address of softAP ! 42 ..............................
25.
AT+CIPAPMAC_DEF – Set MAC address of softAP and save as default! 43 .
26.
AT+CIPSTA – Set IP address of station! 44 ...................................................
27.
AT+CIPSTA_CUR – Set IP address of station ! 45 .........................................
28.
AT+CIPSTA_DEF – Set IP address of station and save as default ! 46 ...........
29.
AT+ CIPAP – Set IP address of softAP ! 47 ...................................................
30.
AT+CIPAP_CUR – Set IP address of softAP ! 48 ...........................................
31.
AT+CIPAP_DEF – Set IP address of softAP, save as default ! 49 ...................
32.
AT+CWSTARTSMART – Start SmartConfig ! 50 ............................................
Espressif Systems / Friday, July 15, 20162 73