Specifications
REFERENCE
15
ABOUT MAKERBOT DESKTOP
4. Move
• • ClicktheMove button or press the M key to enter Move mode.
• • InMovemode,clickanddragwithyourmousetomoveyourmodelaround
on the build plate.
• • InMovemode,holdtheShikeyandclickanddragwithyourmousetomoveyour
model up and down along the z-axis.
• • ClicktheMovebuttonagaintoopentheChangePositionsubmenuandmoveyour
object by a specific distance along the x-, y-, or z-axis.
•
5. Turn
• • ClicktheTurn button or press the T key to enter Turn mode.
• • InTurnmode,clickanddragwithyourmousetorotateyourmodelaroundthez-axis.
• • ClicktheTurnbuttonagaintoopentheChangeRotationsubmenuandrotateyour
object by a specific number of degrees around the x-, y-, or z-axis.
6. Scale
• • ClicktheScale button or press the S key to enter Scale mode.
• • InScalemode,clickanddragwithyourmousetoshrinkorenlargeyourmodel.
• • ClicktheScalebuttonagaintoopentheChangeDimensionssubmenuandscale
your object by a specific amount along the x-, y-, or z-axis.
•
7. File Name
• • Thelenamebardisplaysthenameoftheleorlayoutcurrentlyopen.Thingles
can include multiple layouts, or arrangements of models on the plate.
8. Settings
• • ClickSettings to open the settings dialog.
• • Usethedialogtochangeprintsettingsforthecurrentmodelorlayout.
9. Add File
• • ClickAdd File to open an Open File dialog.
• • NavigatetothelocationofanySTL,OBJ,orThingleandselecttheletoadd
• a model to the build plate.
• • Addasmanymodelstotheplateasyoulike.
• • DuplicatemodelsalreadyontheplateusingtheCopyandPasteoptionsintheEdit
menu or the keyboard shortcuts Ctrl/Command+C and Ctrl/Command+V.