User manual

PRINTING WITH YOUR MAKERBOT REPLICATOR 2X

PRINTING VIA SD CARD

1. Place an SD card in the SD card slot of your computer. The SD card must be:

• Formatted for FAT16

•No larger than 2GB

2. In MakerBot Desktop, click Export Print File. MakerBot Desktop will slice your model.

3. Once your model is sliced, a dialog will appear with an estimated print time and

estimated filament usage, as well as an opportunity to view a print preview.

4. Click Export Now to open a save dialog.

5. Name your X3G file, navigate to the SD card, and click Save.

PRINTING A MODEL CONTINUED