User guide

1 TROUBLESHOOTING 04
Objects Do Not Stick to the Build Plate 05
Objects are Dicult to Remove from the Build Plate 05
Extrusion Stops 06
Replicator 2X Shakes 07
Filament Not Loading 08
Filament Stuck 09
Disassembling an Extruder 10
LCD Error Messages 11
Misaligned Nozzles 14
MakerBot MakerWare Error Messages 16
MakerBot Support 21
Dos and Don’ts 21
Tools You May Find Useful 22
Diagnosing Print Quality Issues 23
2 MAINTENANCE 28
Leveling the Build Plate 29
Replacing Kapton Tape 31
Lubricating the Z-Axis Rod and Idler Pulley 32
Realigning the Gantry 34
Tightening the X- and Y-Axis Pulleys 35
Filament Care 36
Adjusting Extruder Spring Tension 36
TABLE OF CONTENTS
3TABLE OF CONTENTS