Operation Manual

Z Pause Height. This entry allows you
to pause your print at a set height. When
you select this option, you will see two
additional settings: Z Position and Pause
Active. [Fig. 4.6] To set the pause height,
scroll to Z Position, press the M button, and
use the arrows to increase the pause height
in millimeters. Press the M again to confirm
the height. Scroll to Pause Active and use
the M button to toggle the setting ON and
OFF. When Pause Active is set to ON, a Z
height pause will be triggered, even if the Z
Position is set to 0.
Filament Fan. This entry allows you to set an
active cooling fan to ON or OFF during a build.
The MakerBot Replicator 2X does not include
an active cooling fan.
LED Color. This entry allows you to change
the color of the LEDs in the frame of the
MakerBot Replicator 2X. The LEDs can be
set to WHITE, RED, ORANGE, PINK, GREEN,
BLUE or PURPLE, or turned OFF. Use the up
arrow and down arrow to scroll through the
available colors. Use the M button to select
and confirm your selection.
Build Statistics. This entry displays the
elapsed time for the current build and the line
number of the command being executed by
your Replicator 2X. [Fig. 4.7]
Back to Monitor. This entry returns you
to the Monitor screen. The Monitor screen
displays the percent of the print that has been
completed and the temperatures of the Right
Extruder, Le Extruder, and Platform.
ACTIVE BUILD MENU CONTINUED
37CHAPTER TITLE HERE
Fig. 4. 6
Fig. 4. 7