Operation Manual

37
4e. Click on the Flatiron Building to
select it. Hold down the shi key and
click on the Woolworth Building. Then
release the shi key. Both models
should be selected.
4f. Select the Scale button. Click and
drag to change the size of both
models together.
4
Open the .stl files in MakerBot MakerWare | Continued
5a. Select the Save button. The save
dialog gives you the option to save
your plate as an STL or a .thing file.
STLs can be opened by a wide range
of programs, but .thing files allow you
to continue to edit the components of
a plate separately.
Specify a name and location for the
file. For example, you could name the
file flatiron_woolworth.thing.
5
Save your model and toolpath files
USING MAKERBOT MAKERWARE CONTINUED
D MAKING AN OBJECT WITH MAKERBOT MAKERWARE
MB2020_REP2_UserManual_V4.indd 37 7/22/13 5:32 PM