Operation Manual

19
THE LCD KEYPAD
• Four arrow buttons surround a central M
button. Use the arrows to navigate through
the LCD menus and make selections.
• The le arrow usually allows you to go
back or cancel an action.
• A solid red M means the MakerBot
Replicator 2 is working.
• A blinking red M means the MakerBot
Replicator 2 is waiting for user input.
NOTE: If you don’t see the Startup Script, use the up and down arrow buttons to scroll through the
top-level menu on the LCD panel, and use the M button to select Utlities. Scroll to Run Startup Script and
select it. You can use these menus to return to the Startup Script at any time. You can also find a video of
this process at makerbot.com/support/replicator2/videos. If you have problems or questions, refer to the
troubleshooting chapter in this manual or contact MakerBot Support at [e-mail].
Aer you power on the MakerBot
®
Replicator
®
2
Desktop 3D Printer, the LCD panel will light up and
display text. The LCD panel will now run the Startup
Script. The Startup Script will guide you through
leveling the build plate, loading MakerBot PLA
Filament, and creating your first build.
C STARTUP PROCESS: LEVELING, LOADING, TESTING
MB2020_REP2_UserManual_V4.indd 19 7/22/13 5:32 PM