User manual

THE CONTROL PANEL 26

MakerBot recommends keeping Filament Error Detection on. For more information on ﬁlament jams, go to

https://support.makerbot.com.

Sound

Enable or disable the notiﬁcation sounds on the MakerBot Replicator+.

Auto-Unload

Enables or disables whether the Smart Extruder+ will unload any remaining ﬁlament, when the print it

complete. You can select:

1. All Prints to auto unload aer every print, even if the print fails, and when the Smart Extruder+ has run

out of ﬁlament.

2. Successful Prints to auto unload only if the print is successful and when the Smart Extruder+ has run

out of ﬁlament.

3. O to disable the Auto-Unload feature.

DIAGNOSTICS AND LOGS

Select Diagnostics and Logs to run a system diagnostic scan of the MakerBot Replicator+ and save the

resulting logs. These logs can be sent to MakerBot should you ever need support.

Copy System Logs to USB

Allows you to copy system logs of the MakerBot Replicator+ to a USB drive.

Run Diagnostics

Allows you to run a diagnostic scan of the MakerBot Replicator+. Once the diagnostic scan is complete,

you can choose to save the log to a USB drive or to the internal storage of the MakerBot Replicator+.

Copy Diagnostics Logs to USB Drive

Allows you to copy reports of diagnostic scans run on the MakerBot Replicator+ to a USB drive.

CAMERA

Select Camera to take a picture of the build plate and manage saved images.

Take A Picture

Enables you to take a picture of the build plate using the onboard camera. Press the dial to take the picture.

Once the picture has been taken, use the dial to select whether you would like to save the image to the

internal storage of the MakerBot Replicator+ or to a USB drive. Once the image is saved to the desired

location, press the dial to continue.

Browse Pictures

Allows you to view stored images on the internal storage of the MakerBot Replicator+.

Copy Pictures to USB

Enables you to copy images from the internal storage of the MakerBot Replicator+ to a USB drive.

Clear Pictures

Enables you to remove images stored on the internal storage of the MakerBot Replicator+.