User manual

START UP 17
THE GUIDED SETUP
The first time you turn on your MakerBot Replicator+, you will be guided through the initial setup process
using the MakerBot Mobile App and the MakerBot Replicator+ control panel to connect this printer to a Wi-
Fi network. The guided setup is the first time that your MakerBot Replicator+ connects to the Internet via
your Wi-Fi connection and is the most ecient way to establish this connection.
This Guided Setup will walk you through pairing your smartphone or tablet to your printer, connecting the
printer to a Wi-Fi connection, printing oset calibration, and loading filament. From there, it will prompt
you to print a preloaded example print.
BEGIN THE GUIDED SETUP
1. Open MakerBot Mobile on your mobile device and log in with your MakerBot credentials. If you do not
already have a MakerBot account, create one.
2. Tap the Printers icon, or tap the Navigation button and tap Printers.
3. You will be taken to the My Printers screen, which will list any saved printers and will allow you to
connect to new printers.
a. For iOS users, tap the Add a Printer button if there are no printers on your list.
b. For Android users, tap the Floating Action Button to add a printer.
4. Tap Setup a New Printer.
5. Follow the instructions on the MakerBot Mobile App and MakerBot Replicator+ to complete the
Guided Setup.
RERUN THE GUIDED SETUP
To rerun the Guided Setup, select Settings > Reset To Factory Settings > Reset To Factory. Restoring
factory settings will allow you to rerun the Guided Setup.