User Manual

Page 4/7
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 01/07/2013 Reviewed on 01/07/2013
Trade name: ABS Model
(Contd. of page 3)
34.2.6
Wear heat-resistant protective clothing when handling hot/molten product.
9 Physical and chemical properties
·
General Information
·
Appearance:
Form:
solid
Color:
milky white
·
Odor:
Nearly odorless
·
Odor threshold:
no data available
·
pH-value:
Not applicable
·
Change in condition
Melting point/Melting range:
Not applicable
Boiling point/Boiling range:
Not applicable
·
Flash point:
Not applicable
·
Auto igniting:
Product is not selfigniting.
·
Danger of explosion:
Product does not present an explosion hazard.
Risk of dust explosion if enriched with fine dust in the presence of
air
·
Explosion limits:
Lower:
Not determined
Upper:
Not determined
·
Oxidizing properties
Not applicable
·
Vapor pressure:
Not determined
·
Density at 20°C (68 °F):
> 1 g/cm³ (> 8.345 lbs/gal)
·
Solubility in / Miscibility with
Water:
Insoluble
·
Segregation coefficient (n-octonol/water):
Not applicable
·
Viscosity:
dynamic:
Not applicable
kinematic:
Not applicable
·
Other information
No further relevant information available.
10 Stability and reactivity
·
Thermal decomposition / conditions to be avoided:
No decomposition if used and stored according to specifications.
Avoid impact, friction, heat, sparks, electrostatic charges.
·
Incompatible materials:
No further relevant information available.
·
Hazardous decomposition products:
Carbon monoxide and carbon dioxide
Hydrogen cyanide (prussic acid)
Hydrocarbons
Possible in traces.
Styrene
Acrylonitril
Phenol
Acetophenone
(Contd. on page 5)
USA
209330-0001 (B)