User Manual

Page 2/7
Material Safety Data Sheet
acc. to ISO/DIS 11014
Printing date 01/07/2013 Reviewed on 01/07/2013
Trade name: ABS Model
(Contd. of page 1)
34.2.6
·
HMIS
HEALTH
FIRE
REACTIVITY
0
0
0
Health = 0
Fire = 0
Reactivity = 0
4 First aid measures
·
General information
Remove contaminated clothing.
·
After inhalation
Supply fresh air; consult doctor in case of complaints.
If dust or other particles are generated during processing, it is necessary to provide adequate ventilation and/
or respiration protection. If dust/particles have been inhaled call physician.
·
After skin contact
Wash with soap and water.
After contact with the molten product, cool rapidly with cold water.
Do not pull solidified product away from the skin.
Call a doctor immediately.
·
After eye contact
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
·
After swallowing
Rinse out mouth and then drink plenty of water.
If symptoms persist consult doctor.
5 Firefighting measures
·
Suitable extinguishing agents
Water spray
Foam
Alcohol resistant foam
·
For safety reasons unsuitable extinguishing agents
Carbon dioxide
Extinguishing powder.
Lack of cooling capacity may permit re-ignition.
·
Special hazards arising from the substance or mixture
In case of fire, the following can be released:
Smoke
Carbon monoxide and carbon dioxide
Hydrocarbons
Hydrogen cyanide (HCN)
In certain fire conditions, traces of other toxic gases cannot be excluded.
·
Protective equipment:
Wear self-contained respiratory protective device.
·
Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
6 Accidental release measures
·
Personal precautions, protective equipment and emergency procedures
Wear protective clothing.
Avoid formation of dust.
Do not breathe dust.
Avoid contact with eyes.
Do not breathe vapours.
Particular danger of slipping on leaked/spilled product.
(Contd. on page 3)
USA
209330-0001 (B)