T1 Series Label Printer User Manual
Copyright Statement Edition 1.0 issued in April 2018 All rights reserved 2018MAKEiD Printer This manual includes the professional information of Chongqing Jingranyouxu Science and Technology Co., Ltd., which are only for commercial customers’ reading and reference. The contents herein shall not be used, copied or spreaded, publicized by any means for any reason or purpose without the written permission of Chongqing Jingranyouxu Science and Technology Co., Ltd.
Contents Foreword .................................................... 1 Disclaimer .................................................. 2 Safety Instructions ...................................... 3 1.1 Overview .............................................. 8 1.2 Unpacking ............................................ 8 1.3 Packing List .......................................... 8 1.4 Main Parts ............................................ 9 1.5 Technical Parameters and Specification ........................
.1 Preparation before maintenance:........ 15 4.2 Cleaning of the Label Box Reader ...... 15 4.3 Maintenance of Print Head ................. 16 4.5 Cleaning of Internal Space ................. 16 Chapter V Failure Treatment ................. 17 5.1 Failure Indication ................................ 17 5.2 Minor Failures ..................................... 18 1. 2. 3. 4. Failure of print head .......................... 18 Shutdown of printer ...........................
Foreword Dear users: Thanks for choosing T1 series portable label printer designed and manufactured by Chongqing Jingranyouxu Science and Technology Co., Ltd. T1 series portable label printer is a light, handy and convenient thermal wax printer which can realize printing via mobile phone, tablet PC and other devices. It is with good performance, easy operation, durability and wide application range.
Disclaimer This manual expounds the specification and instructions. However, specification and configuration of the printers manufactured thereafter may be altered. The manufacturer and dealers will not be responsible for any direct or indirect loss arising from the difference between manual and the printer. This manual lists problems that may occur, however, unforeseen situation may occur during use.
Safety Instructions Personal safety is all-important during operation and maintenance. Warnings and cautions for printer operation are detailed in this manual. Please read carefully before operation and maintenance. Do not try to repair or adjust it by yourself. In case that the failure cannot be solved in line with this manual, please turn off the printer! Disconnect the power supply. Please contact Customer Service Dept. of Chongqing Jingranyouxu Science and Technology Co., Ltd. via 400-158-9100 for help.
occur. • In case of abnormalities, such as smoking and odor, please disconnect the power supply to avoid burn. • Do not take out the label box during printing, otherwise unforeseen circumstances may occur. • The printer is hot after printing. Do not touch it, otherwise scald may occur. • Do not use inferior label box (the ones not manufactured by MAKEiD), otherwise the print head may be damaged and the service life of printer may be shortened.
ture below ０℃ and a relative humidity over 80%. Meanwhile, when the temperature difference between indoor area and outdoor area is large, do not use the printer immediately after taking it into indoor area. Please use it after the printer has no frosting. • The print head is a precise part.
Cautions for battery use Please read this manual and mark on the battery carefully before operation. Do not remove the battery optionally. • Please store the charged battery properly. Contact between battery electrode and conductor such as key and jewelry may cause short circuit, hot, even burn and property loss or personal injury. • Do not place battery in fire, otherwise electrolyte leakage may occur. In case that the electrolyte gets into eyes, do not knead with hands. Clean eyes with water.
• Do keep battery out of reach of children so as to avoid damage. Cautions for power adapter Please read this manual and mark on the power adapter carefully before operation. • Do not use damaged or worn power line, otherwise electric shock or fire may occur. • Do not contact the power adapter, power plug and power output with wet hand, otherwise electric shock may happen.
Chapter I Product Introduction 1.1 Overview T1 series portable label printer is a smart, portable and interconnected label printer manufactured by Chongqing Jingranyouxu Science and Technology Co., Ltd. With MAKEiD APP, it can realize printing via mobile phone and tablet PC. 1.2 Unpacking After receiving the printer, check it carefully. In case of damage during transportation, claim against the carrier immediately. If there is no damage, check the accessories in line with the packing list.
cate of qualification) 1pc 1.4 Main Parts Label Power button Printer cover Label output USB interface Reset Indicator Fig. 1-1 1. Label output 3. Printer cover 5. USB interface 7. Reset 2. Label 4. Indicator 6.
Fig. 1-2 1. Label box reader 3. Paper outlet 2. Print head 1.
Processor STM32F401 Resolution 178dpi Interface Type-C, bluetooth Effective printing width 18mm Maximum printing speed 15mm/s Width of roll label 12Mm, 16mm, 20mm, 24mm Outer diameter of roll label Maximum outer diameter: 36mm Inner diameter: 18mm Label thickness 0.06～0.15mm Printer dimension 56*130*101mm Weight 0.
Chapter II Installation Function and Specification INPUT Parameters 5V 1A 2.1 Installation of Label Box and Cautions 2.1.1 Check the label box and make sure that all parts are in good status and there is no breakage or other problems. 2.1.2 Insert the label box into the printer as shown in Figure 2-1. Close the printer cover.
Chapter III Printer Operation Figure 2-1 Installation Diagram of Label Box Please take good care of the environment. The old label box belongs to recyclable garbage. Please do not throw it away at will. 3.1 Printer Operation 1. Power on the printer • Li-ion battery pack: 7.4V, 1200mAh • Power adapter * Input: 5V 1A * When the printer is turned on, the indicator indicates nothing after the adapter connected.
3. Alarm • Battery alarm: when the battery level is low, the red lighting will flash. If the printer is interconnected to a mobile phone, an alarm of low battery will show on the APP. 4. Print test When the printer is turned on, connect the mobile phone to the printer and perform self-inspection on the APP. 8. Printer Setting When the printer is turned on, users can set up printing parameters via the APP according to the cases. 9.
Chapter IV be chosen. • Maintenance Note Please choose wireless editing software matching with the mobile device (please see the installation QR code in the annex herein). Chapter IV Maintenance 4.1 Preparation before maintenance: • Please read the “Safety Instructions” herein carefully before printer maintenance. • Use anhydrous alcohol with a concentration over 99% for cleaning. • Do disconnect the power supply before printer maintenance. 4.
dustrial alcohol. 4.3 Maintenance of Print Head To ensure the printing quality and reduce damage of print head from paper scrap, sand, dust particle, glue and other materials, it is suggested that the print head shall be cleaned once every month if it is used frequently and it shall be cleaned before each use if it is not used frequently. Cleaning procedure: • Turn off the power; • Open the cover and take the label box out; • Use swabs with anhydrous alcohol to clean the print head.
Chapter V Treatment Failure Treatment Failure Chapter V 5.1 Failure Indication Normally, when the printer is out-of-order or unusual, a prompt message will show on the panel, meanwhile, the communication between printer and host and printing will stop.
Open the cover The print head is not locked Close the cover 5.2 Minor Failures 1. Failure of print head If there are fixed vertical white lines on the print file, the print head may be dirty or damaged (as shown in the following figure). Output direction Clean the print head first. If the failure cannot be solved, replace the print head. 2.
5.3 Failure due to other unknown causes For failure due to other unknown causes, please contact the Customer Service Dept. of MAKEiD. Telephone: 400-158-9100. Annex Please scan the QR code to get the link for installation of editing software. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules.
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
