User's Manual

8
3.1 Printer Operation
1. Power on the printer
• Li-ion battery pack: 7.4V, 1200mAh
• Power adapter
* Input: 5V 1A
* When the printer is turned on, the indicator indicates nothing after the adapter connected. When the printer is turned off, the
lighting will flash after the adapter connected and it means the printer is not fully charged. The green lighting is normally on
when the printer is fully charged.
2. Turn on the printer
Press down the power button for two seconds. The printer is ready after the green lighting is normally on.
3. Alarm
Battery alarm: when the battery level is low, the orange lighting will flash. If the printer is interconnected to a mobile phone, an alarm of
low battery will show on the APP.
Label paper alarm: when the label paper is run out, the orange lighting will flash. If the printer is interconnected to a mobile phone, an
alarm will show on the APP.
Cover alarm: when the printer cover is open, the orange lighting will flash. If the printer is interconnected to a mobile phone, an alarm
will show on the APP.
4. Print test
When the printer is turned on, connect the mobile phone to the printer and perform self-inspection on the APP.
5. Printer Setting
When the printer is turned on, users can set up printing parameters via the APP according to the cases.
6.Print
When the printer is turned on, users can edit contents on the APP and then print it out.
7.Answers
Ask a question before pressing down the “Answers”, then press the button, the answer will be printed out.
8.Date
Press down the button, the current date will be printed out.
9.Turn off the printer
When the printer is turned on, press down the power button for two seconds. After the indicator extinguishes, release it, then the printer
will be turned off.
3.2 Description of Indicators
• Turnon: the green lighting is normally on
• Failure: the orange lighting flashes
• Charging (when the printer is turned off): the green lighting flashes
• Fully charged (when the printer is turned off): the green lighting is normally on
3.3 Connect a mobile device to operate the printer
The printer is with bluetooth, which can connect to mobile devices. The wireless printing software has label templates. Users can use
the template for editing, then print it out. When a mobile device is connected to the printer and the label template inputted and the built-
in template are inconsistent, the later one will be chosen.
• Note: Please choose wireless editing software matching with the mobile device (please see the installation QR code in the
annex herein).
Printer Operation
Chapter III