User Guide

XY Plotter V2.0-mDraw
29 / 34
（2） Configurations of Pen Up and Pen Down
Input value of Pen Up and Pen Down in mDraw, and observe the movement of mDrawBot. If
the feedback is correct as below, that means your settings are correct.
5
。
6. Samples for Software mDraw and Inkscape
mDraw supports SVG file which is based on open-source software Inkscape. For better
experience of mDraw, please learn the basic operation of Inkscape.
1. Install Inkscape.
2. Create a new vector graphic or open a vector graphic in Inkscape. Inkscape supports to
convert other vector types into SVG file, like *.dxf, *.cdr (please save as an earlier
version) files. Here you go a simple sample.
3. We suggest to choose sketch for BMP as below sample.
5
If the servo arm cannot reach to below angle, please uninstall the servo arm to re-adjust the installation angle.
Please adjust the tightness of rubber band if necessary.
Note: the default value here
is only for reference. In
actual use please apply the
value you got after adjusting
the servo arm.
Pen Up
Pen Down
Servo Arm