Guide

5 Put your smart device close to robot, press the play button to find Bluetooth device,and then connect 、
6
Control your robot with the direction button.
、
Figure 3
Wiring
You may need to switch the order of two
wires to correct the rotation direction.
12
11
Control with App
1、Download and install Makeblock HD app . by either way below
A. Download Makeblock app at
B. Scan QR code below to download Makeblock app.
http://app.makeblock.cc/.
(Figure 1)
2 Check wiring, make sure everything is correct, and then turn on the power of your robot.
3、Turn on the Bluetooth of your smart device.
4、Run Makeblock app, select your robot from Examples.(Figure 2)
、
Figure 1
Figure 2
Play
Direction
Me Bluetooth
Me Ultrasonic Sensor
?
DC Motor-25(M2)
DC Motor-25(M1)
Makeblock Orion
Battery Holder( 6 x AA batteries , )not included
To reduce the electromagnetic interference, please
add ferrite ring for the wires which connected to
motors.
Now it’s time to play your robot!
the robot to your smart device.(Figure 3)
2×
2×
2× 2×