Great tool for beginners to learn MAKER WORKS TECHNOLOGY INC Technical support: support@makeblock.cc www.makeblock.cc :@Makeblock : @Makeblock : +Makeblock graphical programming, electronics and robotics.
Quick Guide WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years old. mBot is an educational robot kit for beginners to get hands-on experience about graphical programming, electronics, and robotics. It is an all-in-one solution for robotics learning and designed for STEM education.
Part List mCore DC Power Jack Bluetooth/2.4G module 2-pin connector for lithium battery USB cable mCore Screw M4×8 6P6C RJ25 Cable Reset Screw driver USB Type-B Connector Power switch Motor Port Battery Holder ( 4 x AA batteries ,not included ) Velcro Motor R Chassis Brass Stud M4×25 M3 nut Me Ultrasonic Sensor RJ25 Port RJ25 Port RGB LED RGB LED Screw M3×25 Motor L Screw M4×8 Me Line Follower Wheel Roller Ball 2 Screw M2.
Assembly Chassis Motor R M3 nut Screw M3×25 ×1 ×1 ×2 ×2 Screw M2.
Wiring Battery Holder Velcro ×1 ×1 AA battery holder Bluetooth/2.4G module Me Ultrasonic Sensor Motor R Screw M4×8 mCore Lithium batter y (Not included) ×4 ×1 Motor R Me Line Follower Bluetooth/2.
Batteries Suggestion Remote Control mCore's power supply: 3.7V DC — 6V DC Mode 2: Wall avoidance robot Option 1: Option 2: Notice: 4 × AA batteries(Not included) 3.7V lithium battery(Not included) with a CR2025 button cell battery for remote standard 2-pin JST-PH connector. control is not included . Mode 1: Remote manual control Line follower robot Mode 1: Remote manual control Users can use buttons to control the Support on-board charge via USB cable.
Graphical Prgramming-mBlock Introduction mBlock is a free modified version of Scratch 2.0 developed by MIT Media Lab. Added Wireless Communication 1. Introduction of Bluetooth module 2. Introduction of 2.4G wireless serial This Bluetooth module is designed specially for mCore with the support of Bluetooth 2.0 and 4.0. It's suitable for both individual users and family. Users can use their smart phones or computers to control the mBots wirelessly with this module. The 2.
Arduino Programming(C language) Arduino is an open-source electronics prototyping platform based on flexible, easy-to-use hardware and software. The Arduino software consists of a development environment(IDE) and the core libraries. The IDE is written in Java and based on the Processing development environment. More detailed tutorials: http://learn.makeblock.
