User's Manual

User Manual
1. Connect the Bluetooth Dongle to your computer.
2. Tap the button on the Bluetooth Dongle, the LED on it would flash quickly. (10Hz
flashing).
3. Let the device which needs to be connected near Bluetooth Dongle until the LED
on the Dongle keeps on.
4. If you need to connect other devices, repeat step 2 to step 3.
Bluetooth Dongle Status Description:
LED keeps on when it is connected.
LED flashes quickly (10Hz flashing) when it is matching.
LED flashes slowly (1Hz flashing) when it is on standby.
Notice:
The Dongle can be connected with Makeblock’s Bluetooth devices only.