Makeblock Co., Ltd. Address: 4th Floor, Building C3, Nanshan iPark, No.1001 Xueyuan Avenue, Nanshan District, Shenzhen, Guangdong Province, China Technical support: support@makeblock.com www.makeblock.com @Makeblock D1.4.6_7.40.
Modular&Programmable Drone USER MANUAL
Table of Contents P02 Software Download P10 Introduction to Stickers P03 Parts List P12 P04 Introduction to Main Control Module P18 User Guide to Aircraft Mode ·Operating Environment ·Warning ·Installation Steps ·Control P05 Introduction to Battery P27 P06 Introduction to Power Module P30 User Guide to Hovercraft Mode ·Operating Environment •Warning ·Installation Steps ·Control User Guide to Custom Mode ·Operating Methods ·Operating Environment ·Warning ·Programming FAQs
Software Download A tablet or smartphone is required to control the Airblock. Download from App Store Search "Makeblock" and install the application from app store. Download from Official Website http://learn.makeblock.com/en/software/ Login to download the corresponding version. System and Device Requirements For iOS Devices: Requires iOS 9.0 or later versions. Compatible with iPhone5, iPad mini, iPad 3 or later models. For Android Devices: Requires Android 4.3 or later versions.
Parts List Main Control Module Battery Charger Charging Cable Power Modules Hovercraft Base Protective Cover 03
User Guide to Aircraft Mode The main control module includes 6 power module plugin sockets, 3 LEDs, an ultrasonic sensor, a barometer, a gyroscope, Bluetooth, a microcontroller chip, etc. Ultrasonic sensor is used for distance measurement. Works together with barometer to measure height change of the aircraft. LED Front View Plug-in Socket LED works as power supply indicator. Brightness and color is adjustable through programming.
Battery Airblock does not have a power switch. When a fully charged battery is inserted into the main controller, the controller automatically enters standby mode. When inserting battery into main control module or battery charger, please ensure that the contact points are placed in the correct direction. A red light indicates that charging is ongoing. A green light indicates that the battery is fully charged.
Power Module Introduction to structure The Power Module includes a motor, a propeller, a plug, a frame, etc. LED is installed on the frame. LED lights up when the motor is activated. LED on aircraft front power module and foot pad are red. Foot pads on other power modules are black. LED as indicators are green.
Power Module Introduction to Operating Principles In order to offset the self-rotation of the aircraft, the propellers are classified in red (counter-clockwise rotation) and black (clockwise rotation). Motors are also classified as clockwise and counter-clockwise rotation. After connecting to main control module, the motor starts spinning and pushes air downwards to generate an upward thrust.
Power Module Installation Angle Each power module may be installed onto its corresponding port on the main control module at 4 different angles.
Power Module Port Numbers The power modules of red propellers are connected to Ports 1, 3, 5 respectively, with the front module to Port 1. Connect the power modules of black propellers to Ports 2,4,6.
Stickers Fuselage Stickers 10 Power Module Stickers Hovercraft Stickers
Stickers Power Module Stickers: Attached to power module side in order to distinguish the direction of Airblock during flight. It is recommended to attach a red sticker to the aircraft front power module (Position 1) and a green sticker to the black propeller power module (Positiotn 4). Other power modules do not need stickers. There are 3 different styles of stickers -- you can choose accroding to your favor.
User Guide to Aircraft Mode
User Guide to Aircraft Mode Operating Environment Space larger than 3m×3m×3m is recommended for indoor flying. Warning： Land: soft surfaces such as carpets and grass may cause interference to the ultrasonic sensor. It is recommended to take off from hard and flat surfaces. Water: do not start or fly the aircraft over water to prevent accidental falling into water, which can cause short circuit and fire damage to the machine. Outdoors: a windy environment may interfere the aircraft's normal flight.
User Guide to Aircraft Mode Installation Step 1 Installing the aircraft front power module Install aircraft front power module with red foot pad onto Port 1 of the main control module. Warning： If the front module is installed improperly, the direction of flight can not be controlled properly.
User Guide to Aircraft Mode Installation Step 2 Install other power modules Install the remaining power modules in sequence onto the main control module.
User Guide to Aircraft Mode Installation Step 3 Battery Installation After a fully charged battery is inserted, Airblock will be automatically turned on and enters the standby mode. The LED on the main control module top will display a white light. When Bluetooth is successfully connected, the light in front will turn red, and the light at rear will turn green. Warning： Before taking off, please ensure Airblock has its top facing upward and Airblock is placed on a flat ground.
User Guide to Aircraft Mode Control Step 1 Follow the instructions on the first page of User Guide to download and install the application. Open the Makeblock application and move the tablet or smartphone close to the running Airblock, Bluetooth connection should be paired. Step 2 Enter the control interface after successful connected. (Note: interface or icons may vary after software updates. Please follow the interface of the latest version. This instruction manual is for reference purpose only.
User Guide to Hovercraft Mode
User Guide to Hovercraft Mode Operating Environment Recommended to operate in open area. Warning： Software: Choose Land or Water mode to control depending on the environment. Land: do not drive the hovercraft on muddy , rugged , or mesh surfaces. Water: do not drive the hovercraft on water with waves or obstacles. Do not use Hovercraft over wide water area, as the Bluetooth connection range is limited. High speed rotating motors and propellers may cause injury.
User Guide to Hovercraft Mode Installation Step 1 Battery Installation Direction of battery contact points 20
User Guide to Hovercraft Mode Installation Step 2 Install the protective cover The protective covers must be installed in Hovercraft mode to protect the propellers and prevent the propellers from causing damage. The protective covers of Port1 and 4 are required only on the top side of the power modules. There are two types of protective covers; Pay attention to their difference during installation.
User Guide to Hovercraft Mode Installation Step 3 Connect the front power module and a black propeller power module to Port 1 and 4 on the main control module respectively.
User Guide to Hovercraft Mode Installation Step 4 After connecting power modules to the main control module, fit the main control module onto the hovercraft hull. Warning： Port 1 faces forwards (the smaller end of the hull is the bow) The main control module must be installed in the correct direction, or it will not be able to control the direction of the hovercraft.
User Guide to Hovercraft Mode Installation Step 5 Protective covers are required on both top and bottom sides of other power modules. There are two types of protective covers; Pay attention to their difference during installation.
User Guide to Hovercraft Mode Installation Step 6 After fitting the protective covers, attach the 4 power modules onto the main control module according to directions indicated in the diagram below. Check if the protective covers are fitted in the accurate places and if the power modules are attached securely to the main control module.
User Guide to Hovercraft Mode Control 26 Step 1 Follow the instructions on the first page of User Guide to download and install the application. Open the Makeblock application and move tablet or smartphone within close distance to running Airblock, Bluetooth connection should be paired. Step 2 Enter the hovercraft control interface after successful connection. (Choose Land or Water Mode according to the corresponding environment.
User Guide to Custom Mode Operating Methods Based on your own ideas, you can mount the power modules at different angles as either propellers or air-blowers. Programming different rotational velocities of motors can achieve corresponding airflow velocities and thrusts in different directions.
User Guide to Custom Mode Operating Environment Recommended for use on flat, clean floors or tables. Warning： Land: soft surfaces such as carpets and grass may cause interference to the ultrasonic sensor. It is recommended to take off from hard and flat surfaces. Water: do not start or fly the aircraft over water to prevent accidental falling into water, which can cause short circuit and fire damage to the machine. In the air: Airblock is unable to fly normally in Custom Mode.
User Guide to Custom Mode Programming Examples for reference: http://learn.makeblock.com Step 1 Follow the instructions on the first page of User Guide to download and install the application. Open the Makeblock application and move the tablet or smartphone close to the running Airblock, Bluetooth connection should be paired.
Troubleshooting Propellers are not spinning Direction is incorrect Poor connection 1. Check if the connection of the power module and the main control module is too widely-spaced, connection is uneven, or foreign matter is present. 2. Check if the contact points of metal spring pins have been oxidized or have been damaged. Aircraft head module is installed in the wrong position 1.
Common Problems Power supply LED does not light up Fail to take off Battery has no power Try again after charging battery for half an hour or longer. Power supply is insufficient After successful connection to the application, you may check the power supply level in the control interface. If power supply is less than 20%, please charge the battery. Incorrect battery installation Battery is installed in the incorrect postion.
Common Problems Firmware upgrade To optimize user experience, Makeblock will continue to upgrade the software. After connecting to the Bluetooth device, you can click the setting icon on the upper left corner of the application. Select firmware information to view the current firmware version of the device. If there is an upgrade released, you may click and upgrade your device. If the upgrade fails, you may try again after connecting the Bluetooth.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
