mBot Ranger 3-in-1 Educational Robot Kit Makeblock Co., Ltd. Technical Support: tec-support@makeblock.com www.makeblock.com : @Makeblock : @Makeblock Nervous Bird : +Makeblock Land Raider D2.1.3_7.40.
Index 1. Basic Knowledge A. Parts List................................................................................03 B. Introduction to Tools.......................................................... 04 C. Me Auriga............................................................................. 06 D. Light Sensor......................................................................... 08 E. Sound Sensor....................................................................... 09 F. Gyroscope Sensor...........
Quick Guide WARNING:CHOKING HAZARD - Small parts. Children should be accompanied by adults. . mBot Ranger is a three-in-one STEM educational robot kit which supports three building forms: a robot tank, a three-wheeled racing car, and a self-balance car. Program and control mBot Ranger via smartphone, tablets, or computer to start your exploration in the world of robotics.
Introduction to Tools Tighten the screw with force according to the direction of the diagram Screw M2.
Me Auriga Introduction to Interfaces of Me Auriga Power Jack USB Connector Reset Power Switch Tag Color Compatible Module Types Typical Me Modules (6-12V DC) Driven modules Me Motor Driver Me Servo Driver Me Stepper Driver Hardware serial port Me Bluetooth Me Bluetooth Module (Dual-Mode) One way digital interface Dual digital interface I²C port Dual & one way analog interface Me Ultrasonic Sensor Me RGB LED Me Limit Switch Me 7 Segment Serial Display Me PIR Motion Sensor Me Shutter Me Line Fin
Light Sensor Sound Sensor Me Auriga has two on-board light sensors. Each of Ranger's light sensors can measure how much light is shinning on it. The more light shines on the sensors, the higher the signal it feeds back. Light sensors can be used to make an intelligent dimming lamp, a light-avoiding robot and a light-following robot. The sound sensor on Me Auriga is designed to detect the intensity of sound in the surrounding environment.
Gyroscope Sensor Temperature Sensor Ranger's on-board gyro sensor is a motion processing module. It measures the angular rate and the acceleration information of your robot. Based on MPU-6050, this gyro sensor combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion Processor™ (DMP) capable of processing complex 9-axis Motion Fusion algorithms. It can be used together with encoder motor to build a self-balance car.
Me Ultrasonic Sensor Me Line Follower Sensor Me Ultrasonic Sensor is an electronic module that emits an ultrasonic wave and determines the distance between the sensor and an object based on the time it takes to send the signal and receive the echo. Ultrasonic sensors have numerous applications, such as parking assistance sensors in cars and proximity alarms. This Me Ultrasonic Sensor can be attached to the port with yellow tags on Me Auriga.
Land Raider Battery Information Battery for Ranger: Option 1. 1.2V (6) AA rechargeable batteries. (Not included in this kit). Option 2. 1.5V (6) AA alkaline battery (Not included in this kit). Energizer and DURACELL are recommanded. We recommand that you'd better use rechargeable batteries. IMPORTANT BATTERY INFORMATION: • Use only fresh batteries of the required size and recommended type. • Do not mix old and new batteries, different types of batteries.
Assemble Land Raider 1:1 1:1 M4X10 (2) (1) (1) (2) M4x8 (4) (2) 1 2 3 √ × 4 5 6 7 4 1 1:1 16 1:1 M4x8 (4) (2) 2 3 62T 90T M4x10 (2) (1) (1) 1:1 M2.5X12 (2) (2) 1:1 M4X25 (2) (2) (2) (4) (2) Note:please refer to the tool tips in page 5 and use wrench to tighten the nuts.
1:1 (1) M4x8 (2) (4) (1) 1:1 1:1 M4X25 (2) (2) (2) (4) (2) 8 10 11 M4x8 (2) (1) 9 1:1 (1) 12 13 (1) 14 15 M4x14 (4) (4) 18 1:1 * Note: AA batteries are not included in this kit.
1:1 Connect the left motor and right motor to the Wiring of Land Raider M4x8 (2) (2) (1) corresponding port of M1 Me Auriga.
