User manual

Panel Controls (cont’d)

CV:

4. Ego/Id Balance Control: with nothing inserted at the Ego Input, sets the range of probable values. Turning this control CCW, the

random values generated by the system tend to “cluster.” With a signal applied to the Ego Input, it allows that external

signal to be balanced with the internal signal source to generate random voltages.

5. Ego Input (external input for S&H): Signals applied here are injected directly to the uncertainly, beating heart of the Wogglebug.

Accepts Control Voltages or Audio Rate signals; expects 10Vpp max.

6. Stepped Output: At lower Clock rates, the Stepped Random Voltage appears here: new value occurring at every clock pulse

indicated by the blue System Clock LED. At higher (audio) clock rates, bit reduction eects may be achieved by inserting an

audio signal into Ego Input and setting Ego/Id Balance full CCW; 10Vpp range.

7. Stepped Output Activity Window: visual indication of approximate Stepped Random Voltage value.

8. Inuence Input: CV and/ or Audio Signal input that performs the following duties: modulates frequency of SMOOTH and Woggle

VCOs, inputs to the Ring-Mod circuit, and level shifts the Woggle CV signal. Responds 0V to 10V.

9. SMOOTH OUT: Smooth Control Voltage appears here, the smoothness of which is set by the Speed/Chaos Control; 0V to

10V.

10. Woggle Control: Sets how quickly (or slowly) the Woggle circuit is able to catch the Smooth/Stepped circuit. Clockwise slows

the Woggle CV, counterclockwise speeds it up.

11. Woggle CV OUT: A of product of the Smooth/ Stepped CV, this voltage quivers, shakes, and chases after the heart of the system...

always, and is smoothed by the Woggle panel control; 0V to10V.