User manual

8
Voltage Controlled Crossfading and Panning with modDemix and MATHS
Crossfading
Send two signals of your choice to the modDemix Ch1 and Ch2 INputs. Select a positive-going Control Signal such as a MATHS/-
Function envelope or a sequence from Rene.
Using a multiple, patch the Control Signal to modDemix Ch1 Carrier/CV IN, and also to MATHS, set up as a Voltage Mirror (see
MATHS manual p.17). Patch MATHS SUM to Ch2 Carrier/CV IN.
Monitor modDemix SUM Out. Some adjustment of the MATHS Ch2 and Ch3 panel controls may be necessary to ne-tune the
crossfader.
Panning
For panning, patch identically to the crossfading patch, except instead of two signals, mult the same signal to Ch1 and Ch2 on the
modDemix. Instead of monitoring the SUM Output, send the Ch1 and Ch2 outputs to Left and Right inputs on your monitor, or to
whatever further signal processing stages you prefer.