User manual

Half Wave Rectication
Apply bi-polar signal to CH. 1, 2, 3, or 4 Inputs. Take output from OR
Output. Mind the normalizations to the OR buss.
Typical Voltage Controlled Pulse/ Clock w/ Voltage Controlled Run/
Stop (Clock, pulse LFO)
Same as Typical Voltage Controlled Triangle Function, only the output is
taken from EOC or EOR. CH. 1, Rise parameter more eectively adjusts
frequency and CH. 1 Fall parameter adjusts pulse width. With CH. 4, the
opposite is true, where Rise adjusts more eectively Width and Fall adjust
frequency. In both Channels, all adjustments to Rise and Fall parameters
aect frequency. Use CYCLE Input for Run/Stop control.
Voltage Controlled Pulse Delay Processor
Apply Trigger or Gate to Trigger Input if CH. 1. Take output from End Of
Rise. Rise parameter set delay and Fall parameter adjusts width of the
resulting pulse.
Patch Ideas: Analog Signal Processing, Voltage MATHS!
18