User manual

35
Using the 0 - CoAS t with Other DevIces
The 0-Coast's signal inputs and outputs t the standard of the Eurorack modular synthesizer created by Doepfer. For
details of this format visit http://www.doepfer.de/home_e.htm
Figure: 69
Any CV or Gate signal conforming to these
signal levels may be used to control the
0-Coast, and vice versa.
EXAMPLES: Sequence the 0-Coast with René or
Korg/Arturia sequencers, process the 0-Coast's
DYNaMiC output in the Make Noise System 0.
Figure 70: The 0-Coast's CV and Gate OUTputs may be
used to control other devices.
EXAMPLES: Use the 0-Coast's MIDI-CV Converter to play
other modular synthesizers with a MIDI keyboard, use the
SLOPE or CONTOUR circuit to control the Expression input
on a stompbox from Moog or Earthquaker Devices.