User Manual

USB & SD Card Mode

USB

To use USB mode, insert a USB drive into the USB port at the back of the speaker (Ref.13). You will hear the

word ‘USB’ from the speakers indicating that USB mode is active, and the ‘USB/OPT’ mode indicator light

(Ref.7) will light up blue. If necessary, select ‘USB’ mode using the ‘Mode’ button (Ref.24)/(Ref.3).

To use SD mode, insert a SD/TF card into the SD port at the back of the speaker (Ref.14). You will hear the

words ‘Memory card’ come from the speakers, indicating that SD card mode is active, and the ‘SD’ mode

indicator light (Ref.7) will light up red. If necessary, select ‘SD’ mode using the ‘Mode’ button (Ref.24)/(Ref.3).



Maximum storage compatibility for USB and SD/TF cards: 64GB.

Connecting Headphones

Connect wired headphones (not included) to the headphone port of the Majority D40 speakers (Ref.6) to

listen to audio through headphones.

Ensure the volume is turned down before you use the headphones.

You will now hear audio output through the headphones.



Please note that the Majority D40 speakers are not compatible with Bluetooth headphones.

Warranty