Installation Guide
11
Instrucons Guide
FM Radio
Press the ‘Power/Mode’ button (Ref.) to switch to FM Radio. The
rst time you do this, FM frequency “87.50MHz” will be displayed
on the screen.
Ensure that the antenna is fully extended so that the best signal
is being received for the radio scan (Ref.).
To auto scan up the bandwidth, press and release the ‘Scan’
button (Ref.). This will start scanning up the frequency band
and save available stations. The rst available station with strong
signal will begin to play.
To ne tune or search for stations, use the ‘Skip Back’ or ‘Skip
Forward’ buttons (Ref./13). You can press and release these
buttons multiple times to browse through slowly, or press and
hold the buttons to search quickly.
Press down the ‘Volume/Select’ dial to switch between Mono
and Auto. Mono will play the same through both speakers and
Auto will oer a better stereo sound.
When you turn the radio on again after it switching o, it will
automatically tune to the same station (DAB or FM) that was last
selected.
When listening to a FM station, you can view information about
the station by pressing the ‘Menu’ button (Ref.).