Instruction Manual

9
6.2. Operation
Time setting:
The time will be set when it is connected to your PC. If you find the DATA
LOGGER time is incorrect, click the “ ” icon to open the below dialog.
Input the correct date and correct time and select the date format display
on the Data Logger , and click “OK” button then Data Logger time will
update.
Data Logger setup:
Click on the icon “ ” on the menu bar.
“Samprate Setup” : set the sample log rate at a specific rate from 1 sec. to
24 hr.
“Channel Setup” : set up record current or voltage only. It can also
record both at the same time.
“Manual”,“Auto” : manual or auto start method
“User name” : user name. It can not leave spacebar between the
words. Maximum 14 letters.