User Manual
27D7300
48
VWF Series Vented Gas Log Set
LG909
VWF30 Flame appearance
FLAME APPEARANCE
CHECKING BURNER FLAMES
Flame should be yellow and extend vertically (not curling
toward replace screen).
PILOT FLAME APPEARANCE
The pilot ame must always be present when appliance is
operating. It should just touch the top of the thermocouple/
thermopile tip.
Ember bed should have
a yellow/orange glow
During manufacturing, fabricating, and shipping, various components of this appliance are treated
with certain oils, lms, or bonding agents. These chemicals are not harmful, but may produce annoy-
ing smoke and smells as they burn off the rst time the appliance is used. Operate the appliance
2 to 3 hours at the highest setting to burn off all the oils, lms, etc. Never use this appliance with
glassed doors closed. This could cause the pilot to go out and severe sooting outside the replace.
Always operate this appliance with the replace screens in place.
LG909
Thermocouple/
Thermopile Tip
LG910
SPK Pilot flame
LG910