Installation Instructions

44
Majestic • RUBY25IN, RUBY25IL, RUBY30IN, RUBY30IL, RUBY35IN, RUBY35IL Installation Manual • 2542-980 Rev. i • 9/19
Figure 9. Log #7 Installed
Figure 7. Log #5 Installed
Figure 8. Log #6 Installed
LOG #5: Place the small end of Log #5 in the at notch of Log #4 and the big end in the at spot of Log #1. See Figure 7.
LOG #7: With the bark side of Log #7 facing forward place the big end of the log on the at spot of Log #2. The small end of
Log #7 will rest on the base pan, lined up with the edge of the base refractory and the air slot in the base pan. See Figure 9.
Figure 10. Log #8 Installed Figure 11. Log #9 Installed
LOG #9: With the bark side of Log #9 facing right, set the log onto the at spot of Log #4. The tip of the pointed end of the
log will contact Log #2 just to the right edge of the burnout area of Log #2. The big end of the log will sit on the refractory
embers. See Figure 11.
LOG #6: With split side of Log #6 facing left, slide it under Log #3 until it contacts Log #1. Slide Log #6 to the right until it
contacts log pins E and G. See Figure 8.
LOG #8: With the bark side of Log #8 facing left, place the at end of the log on the at spot of Log #3. The at end of Log
#8 should be ush with the back side of Log #3. The pointed end of Log #8 will line up with the edge of the refractory embers
and sit just to the left of the grout line. See Figure 10.
Figure 6. Log #4 Installed
LOG #4: With the at spot of Log #4 to the left, place it on the burner and slide it to the right until it contacts log pin D. Then
slide Log #4 forward until it contacts log pins B and C. See Figure 6.
4
1
5
E
G
6
3
1
2
7
9
4
2
8
3
2542-935
4
B C
D