Installation Instructions
41
Majestic • RUBY25IN, RUBY25IL, RUBY30IN, RUBY30IL, RUBY35IN, RUBY35IL Installation Manual • 2542-980 Rev. i • 9/19
Figure 4. Log #2 Installed
Figure 3. Log #1 InstalledFigure 2. Burner Location
Figure 5. Log #3 Installed
1
2
3
4
5
6
7
8
MODELS: RUBY30IN, RUBY30IL
RUBY30 SRV LOGS
LOG ID SRV PART # MOLDED LOG #
1 SRV2542-711 42-1
2 SRV2544-715 42-5
3 SRV2542-712 42-2
4 SRV2542-715 42-5
5 SRV2542-717 42-7
6 SRV2542-714 42-4
7 SRV2542-717 42-7
8 SRV2542-718 42-8
Mystic Embers: The RUBY come standard with Mystic Embers. Refer to the appliance installation manual for instructions on
how to properly install the Mystic Embers in the appliance. The Mystic Embers must be installed after the logs are installed.
Figure 1. Log Identication
LOG #1: With the pilot hood cutout on the left, place the right end of Log #1 against log pin F and then lower it down over
the pilot hood. Slide the log back until it contacts the air scoop. See Figure 3.
LOG #2: With the burnout area facing right, place the center of the small end of Log #2 against log pin A. Place the big end
of the log on the at spot of Log #1. See Figure 4.
LOG #3: The burnout area of Log #3 will face forward. Place the right end of Log #3 centered against log pin E and the left
end on the at spot of Log #1. See Figure 5.
A
B C
D
E
F
PILOT HOOD
AIR SCOOP
1
F
1
2
A
1
3
E