Installation Manuel

Hearth & Home Technologies • Power Vent Inline (PVI-SLP) Instructions • 2196-900 Rev. AC • 12/15

STEP 4

GROUND

WHT

AUX RC300

MODULE

AUX 1

AUX 2

8K1-PVI

TO JUNCTION BOX

110VAC

ACCESSORY

CABLE

ORG

TO JUNCTION BOX

110VAC

8K1-PVI

WIRE

HARNESS

BROWN

RED

STEP 2

STEP 3

STEP 5

VALVE

ORANGE

(PILOT)

GREEN

(MAIN)

STEP 1

STEP 6

Figure 4.4 PVI Wiring - IntelliFire

Ignition System

IntelliFire IPI Module (Green)

1. Attach the new 8K1-PVI module to the 6V transformer.

2. Connect the pilot wires (white to S and orange to I) to

the 8K1-PVI module.

3. Connect the new Aux RC300 to the 8K1-PVI module.

4. Plug the Aux RC300 into the Junction Box.

5. Attach the 8K1-PVI wire harness to the 8K1-PVI

module. Connect green and orange valve wires and

reconnect ground wire to chassis.

6. Connect the accessory cable coming from the PVI to

the AUX RC300 (AUX 2 port) and the corresponding

colored wire on the wire harness.