Installation Manuel

16
Hearth & Home Technologies • Power Vent Inline (PVI-SLP) Instructions • 2196-900 Rev. AC • 12/15
For additional scenarios to attach the PVI-SLP, the optional
mounting brackets (2196-024) can be used. They can be
secured to the side brackets on the PVI-SLP using wing
nuts (supplied). The brackets can be attached anywhere
along these designated holes. See Figure 3.11.
The optional mounting brackets may be used when
mounting the PVI-SLP to a studded wall. See Figure 3.12.
Securing the PVI-SLP inside a fl oor joist can be easily
done using the side brackets. See Figure 3.13. If the side
brackets cannot be used, or additional support is needed,
the optional mounting brackets can be used as shown in
Figure 3.14.
Figure 3.10
Figure 3.11
Figure 3.12
Figure 3.13
Figure 3.14
SCREWS
SCREWS
SCREWS