User Manual

14
PH Gas Logs
65D2035
The millivolt valve is a self-powered combination gas control



1. Use 18 AWG, two-wire cable, 20 feet maximum
length.
2. At one end of the cable, connect both wires to the wall
switch or thermostat. At the other end, connect one wire
to TP/TH and one wire to TH. The color of the wires
does not matter. Or you can hook the wall switch or
thermostat to wires on the unit.





FP2112
wiring diagram
12/08
Wall
Switch
On/Off Switch
On/Off
Switch
Millivolt
Valve
ODS Pilot
TH = 3
TP = 1
TP/TH = 2
ODS Pilot
Spade Terminal
Switch
Optional Wall
Switch, Remote
Receiver or
Optional T-Stat
FP2112
Figure 15 -
Wiring Diagram