User Manual
25
PH Gas Logs
65D2035
This appliance is equipped with an ignition device which automatically lights the pilot. Do not try to
light the unit by hand.
BEFORE OPERATING smell all around the appliance area for gas. Be sure to smell next to the oor
because some gas is heavier than air and will settle on the oor.
• Do not attempt to light any appliance.
• Do not touch any electric switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instruc-
tions.
• If you cannot reach your gas supplier, call the re department.
Use only your hand to push in, or turn the gas control knob. Never use tools. If the knob will not push
in or turn by hand, don't try to repair it. Call a qualied service technician. Force or attempted repair
may result in a re or explosion.
Do not use this appliance if any part of it has been under water. Immediately call a qualied service
technician to inspect the appliance and to replace any part of the control system and any gas control
that has been under water.
LG1097
PH burner controls
Piezo Ignitor
Switch
Control
Knobs
LG1097
Location of Piezo Ignitor, Control Knobs
and Switch on Millivolt Unit