Decorative Shroud Install Manual

Hearth & Home Technologies Inc. • LDS33/LDS46 Decorative Shrouds • 31173 • Rev E • 04/09
7
• When using an LDS46, you must install the adjustable
wind braces, one at the top and one at the bottom of the
shroud.
• Place the top brace in the center (or as close as possible)
and secure it in place by screwing it to each side. See
Figure 21.
• Screw the brace pieces together in order to maintain/
secure the dimensions of the shroud. See Figure 22.
The shroud with the top wind brace installed is shown
in Figure 23.
• Install the second brace in the bottom of the shroud.
Figure 21 Attach Top Wind Brace to Shroud
Figure 22 Secure Adjustable Brace
Figure 23 Shroud with Top Wind Brace Installed