Installation Sheet
Majestic • ECHEL36IN-C/STIN-C, ECHEL48IN-C/STIN-C, ECHEL60IN-C, ECHEL72IN-C Installation Manual • 2608-980 Rev. C • 8/1962
WARNING! Risk of Fire! DO NOT apply combustible
materials beyond the minimum clearances. Comply with
all minimum clearances to combustibles as specied in
this manual. Overlapping materials could ignite.
1. Follow instructions provided with decorative front for
installation.
0-1 Inch Thickness Overlap Fit Method
The non-combustible nishing material, 0-1 inch thick,
should be installed up to the replace opening on the top
bottom and sides.
Use the factory-installed top nishing guard to ensure the
nishing material does not extend into the replace open-
ing.
See Figure 10.9 for minimum nished opening dimen-
sions.
Figure 10.9 Non-Combustible Finish Material Diagram for 0-1 Inch Thick Overlap Fit Method (Picture Frame Front)
WARNING! Risk of Fire! DO NOT apply nishing mate-
rial beyond the top nishing guard and the bottom nish-
ing template. Appliance will overheat if nishing material
extends into appliance opening.
NOTICE: Decorative front will not t properly if nishing
material is applied beyond the nishing guard.
Picture Frame Front (PFF)
NOTICE: The nishing material thickness not only includes
the decorative nish materials (marble, tile, slate, etc) but
also the thin set, lath and adhesive used to attach the
decorative nish material.
Non-Combustible Finish Materials
Overlap Fit (0-1 Inch Thick Finishing Material Only)
Decorative Front Finishing Method Material Thickness Trim Ring
Picture Frame Front (PFF) Overlap Fit 0-1 inch Not included
Picture Frame Front (PFF) Inside Fit 0-4 Not included
FIREPLACE VIEWING AREA
15-3/4 IN.
51-1/8 IN. ECHEL48IN-C/ECHEL48STIN-C
39-1/8 IN. ECHEL36IN-C/ECHEL36STIN-C
63-1/8 IN. ECHEL60IN-C