Installation Instruction


20302381
9
Designer Series Direct Vent Gas Fireplace
2756O” (699 mm)
(1/2” Drywall)
or
276” (696 mm)
(5/8” Drywall)
4656” (1172 mm)
(1/2” Drywall)
or
46” (1168 mm)
(5/8” Drywall)
27
(6
” (708 mm)
46
6
” (1184 mm)
486QE"
(1224 mm)
FP2849
corner framing
8
556QE
”
(221 mm) Min,
7”
(178 mm)
Min.
4
56O
”
(114 mm)
Min.
Remove box and
Insulation for Top
Vent Congurations


Fold Outer Tabs
and Nail to Framing
Members
Figure 6 -
CRLDV and CLLDV (Corner) Framing
If using 5/8" drywall, remove
framing tabs and re-install
on 2nd set of holes
positioned slightly inwards
If using 5/8" drywall,
remove framing
tabs and re-install
on 2nd set of holes
positioned slightly
inwards
The replace must be secured to the oor and/or to framing
studs as shown in Figure 6 . Use four (4) wood screws or
masonry/ concrete screws to secure replace to the oor.
Use four (4) screws to attach replace to framing. The side
brackets or nailing anges are designed to accommodate
two wall boards thicknesses, 1/2" or 5/8".

    


        

Figures 5, 6, 7
If using 5/8" drywall, remove
noncombustible supports, rotate
180° and reinstall to achieve
5/8" depth