User Manual

SYNCING ONE REMOTE:
Each base comes factory synced to its own remote.
If not synced follow these instructions:
Step 1: Push the recover button on cord under the bed,
hold the “head down” button and the “foot up”
button on the remote at the same time for 10 seconds.
Once you hear a beep that will indicate that the
remote is synced.
Step 2:
SINCRONIZACIÓN DE UN CONTROL REMOTO:
Cada base viene sincronizada de fábrica a su propio control remoto.
De no ser así, siga estas instrucciones:
Paso 1: Presione el botón de recuperación del cable que está debajo de
la cama, mantenga presionados los botones “cabecera hacia
abajo” y “pies hacia arriba” del control remoto al mismo tiempo
durante 10 segundos.
El control remoto se habrá sincronizado una vez que escuche un
sonido de bip.
Paso 2: