User Manual

Step 6:

Place the cushions (#13 and #14) onto the seat assembly.

Secure the cushions to the seat assembly by using the plastic

clamps. See Figure 6.

Step 3:

Fasten the swing bars of the arm assembly to the bottom

frame (#4) by using bolts (#7), washers (#9), and plastic nuts

(#10). Keep the bolts loose. See Figure 3.

Step 2:

Place the arm assembly on to the bottom frame (#4). Make

sure that the higher tube on the bottom frame (#4) is facing

the front of the glider. See Figure 2.

FIGURE 6

FIGURE 5FIGURE 4

#7 BOLT M6*55

FIGURE 3

FRONT

HIGHER

TUBE

FIGURE 2

Step 5:

Fasten the seat assembly (#5) to the right and left arms

(#1 and #2) by using bolts (#8), washers (#9), and plastic

nuts (#10). Make sure that all of the bolts have been

tightened completely. See Figure 5.

PAGE 2 OF 3V-3

Step 4:

Place the seat assembly (#5) on to the arm assembly.

See Figure 4.

#8 BOLT M6*75

STOP DO NOT RETURN TO THE STORE!