Use and Care Manual

Maincraft
Page 2
5. Wipe away any excess sealant with a rag. (Note: It is recommended to let the silicone sealant cure for
12-24 hours before comoletina installation.)
6. Install faucet and drain while adhering to local plumbing codes.
Drop in Basin
INSTALLATION INSTRUCTIONS
Screwdriver
Tape Measure
Supply Shut-Off Valve
Neutral Mildew Resistant
Silicone Sealant
Teflon Tape
B
INSTALLATION PROCEDURES
1. Place the sink upside down in desired position on
the countertop and traHP nnmnlptplv arnunri the
edge of the sink. Using the cutout template (may
not included) as a reference, position it so that the
outer template edqe lines up with the sink edae
profile you just traced, then trace the cutout hole in
the middle of the template.'
2. Drill several pilot holes inside the cutout
line traced in step 3, then use a saber saw or
jig saw and cut along the line to the next
pilot hole. Place a support underneath the
portion of the counter you are removing to
prevent it from fallina into the cabinet and
splitting the countertop.
3. Apply silicone sealant (not included)
around the cutout on the countertop
surface.
4. Carefully lower the sink into the cutout in
the countertop and maneuver into final
position.
HELPFUL TOOLS
Adjustable Wrench
Cutting machine