Hardware reference guide

CableFast Cabling
35013379 11/2011 803
Wiring Diagram (Chassis Grounding)
The following shows the wiring for the 140CFK00400 (chassis grounding) module.
NOTE:
1. When used with the 140AVO02000 analog voltage out module, the master
override connections and range select must be made on the Quantum I/O
connector.
2. When using a single power supply, there will be no channel-to-channel isolation
of input points.
3. For wiring the 140ACO02000 and the 140AVO02000, see the wiring diagrams in
ACO02000 I/O Module (see page 509) and AVO02000 module (see page 517).
4. The GND (ground) terminal point is not connected.